Rear New-Steel Drive Axle Shaft — 28-Spline, 5-Lug, 30-7/16" | 1973–1988 GM A-Body, B-Body & C-Body Cars
SKU
447-1067
Price
$115.00
Core Charge
$0.00
Description
Features and Benefits
New-manufacture steel construction eliminates the risk of pre-existing fatigue, wear, or hidden damage associated with remanufactured or used axle shafts.
28 inboard splines provide positive, rattle-free engagement with the differential side gear for smooth, reliable power transfer to the rear wheels.
30-7/16" inner shaft length matches original equipment geometry for correct axle end-play and proper wheel bearing seating — no shimming or modification required.
Rust-resistant protective coating guards the shaft body against corrosion in road-salt and high-moisture environments, extending service life over bare steel alternatives.
5-lug wheel bolt pattern compatibility confirmed for all listed GM A-body, B-body, and C-body passenger car applications from 1973 through 1988.
Backed by a 1-year parts warranty from US Powertrain, a professional drivetrain manufacturer with expertise in new and remanufactured automotive powertrain components.
Classic GM cars deserve drivetrain components built to survive decades of use — and the US Powertrain 447-1067 Rear Drive Axle Shaft delivers exactly that. Manufactured new from high-strength steel, this axle shaft is engineered as a direct replacement for the rear solid axle assemblies found across a broad range of 1973-1988 General Motors passenger cars, spanning Buick, Chevrolet, Oldsmobile, and Pontiac nameplates including the Caprice, Impala, Monte Carlo, Cutlass, LeSabre, Grand Prix, and more. Unlike remanufactured alternatives, this shaft starts fresh — no worn splines, no fatigue history, no uncertainty about a prior service life. The 28-spline inboard engagement provides positive, rattle-free connection to the differential side gear. The 30-7/16-inch inner shaft length matches OE geometry for proper axle end-play and bearing seating. A protective rust-resistant coating guards the shaft body against corrosion in road-salt environments, extending service life well beyond what bare steel can offer. US Powertrain brings professional-grade drivetrain expertise to this application, inspecting OE design and incorporating engineering refinements where opportunities exist. Backed by a 1-year parts warranty, this axle shaft is the right answer for restorers, daily drivers, and fleet operators keeping classic-era GM rear-wheel-drive vehicles rolling reliably.
US Powertrain New Rear Drive Axle Shaft - 28 Spline, 5-Lug, Rust-Resistant Steel | 1973-1988 Buick, Chevrolet, Oldsmobile, Pontiac GM Cars
New-manufacture steel construction eliminates the risk of pre-existing fatigue, wear, or hidden damage associated with
remanufactured or used axle shafts.
28 inboard splines provide positive, rattle-free engagement with the differential side gear for smooth, reliable power transfer to the rear wheels.
30-7/16" inner shaft length matches original equipment geometry for correct axle end-play and proper wheel bearing seating — no shimming or modification required.
Rust-resistant protective coating guards the shaft body against corrosion in road-salt and high-moisture environments, extending service life over bare steel alternatives.
5-lug wheel bolt pattern compatibility confirmed for all listed GM A-body, B-body, and C-body passenger car applications from 1973 through 1988.
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614334
ABS Tone Ring Included: No
Axle Nut Included: No
Axle Shaft Seal Included: No
Bearing(s) Included: No
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inboard Spline Quantity: 28
Inner Shaft Length: 30 7/16"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Rust Resistant Coating: YES
Shaft Material: Steel
Wheel Bolt Pattern Size: 5 Lug
Wheel Nuts Included: NO
Applications:
US Powertrain New Rear Drive Axle Shaft - 28 Spline, 5-Lug, Rust-Resistant Steel | 1973-1988 Buick, Chevrolet, Oldsmobile, Pontiac GM Cars
New-manufacture steel construction eliminates the risk of pre-existing fatigue, wear, or hidden damage associated with
remanufactured or used axle shafts.
28 inboard splines provide positive, rattle-free engagement with the differential side gear for smooth, reliable power transfer to the rear wheels.
30-7/16" inner shaft length matches original equipment geometry for correct axle end-play and proper wheel bearing seating — no shimming or modification required.
Rust-resistant protective coating guards the shaft body against corrosion in road-salt and high-moisture environments, extending service life over bare steel alternatives.
5-lug wheel bolt pattern compatibility confirmed for all listed GM A-body, B-body, and C-body passenger car applications from 1973 through 1988.
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614334
ABS Tone Ring Included: No
Axle Nut Included: No
Axle Shaft Seal Included: No
Bearing(s) Included: No
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inboard Spline Quantity: 28
Inner Shaft Length: 30 7/16"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Rust Resistant Coating: YES
Shaft Material: Steel
Wheel Bolt Pattern Size: 5 Lug
Wheel Nuts Included: NO
Applications:
- 1973-1977 Buick Century - PartType: Drive Axle Shaft - Position: Rear
- 1973-1977 Buick Regal - PartType: Drive Axle Shaft - Position: Rear
- 1973-1973 Chevrolet Chevelle - PartType: Drive Axle Shaft - Position: Rear
- 1973-1977 Chevrolet Monte Carlo - PartType: Drive Axle Shaft - Position: Rear
- 1973-1977 Oldsmobile Cutlass - PartType: Drive Axle Shaft - Position: Rear
- 1973-1977 Pontiac Grand Prix - PartType: Drive Axle Shaft - Position: Rear
- 1973-1977 Pontiac LeMans - PartType: Drive Axle Shaft - Position: Rear
- 1980-1985 Buick LeSabre - PartType: Drive Axle Shaft - Position: Rear
- 1980-1988 Chevrolet Caprice - PartType: Drive Axle Shaft - Position: Rear
- 1980-1985 Chevrolet Impala - PartType: Drive Axle Shaft - Position: Rear
- 1980-1984 Oldsmobile 98 - PartType: Drive Axle Shaft - Position: Rear
- 1980-1985 Oldsmobile Custom Cruiser - PartType: Drive Axle Shaft - Position: Rear
- 1980-1981 Pontiac Bonneville - PartType: Drive Axle Shaft - Position: Rear
- 1980-1981 Pontiac Catalina - PartType: Drive Axle Shaft - Position: Rear
- 1980-1986 Pontiac Parisienne - PartType: Drive Axle Shaft - Position: Rear
- 1984-1985 Buick Electra - PartType: Drive Axle Shaft - Position: Rear
Installation
Installation Instructions
INS_FORM.docx
(171.9 KB)
Core Charge
Core Charge
$0.00
Dimensions
Dimensions
42 × 8 × 8 in
Weight
15 lb
Fitment
Vehicle Fitment
1973 Buick Century
1974 Buick Century
1975 Buick Century
1976 Buick Century
1977 Buick Century
1984 Buick Electra
1985 Buick Electra
1980 Buick LeSabre
1981 Buick LeSabre
1982 Buick LeSabre
1983 Buick LeSabre
1984 Buick LeSabre
1985 Buick LeSabre
1973 Buick Regal
1974 Buick Regal
1975 Buick Regal
1976 Buick Regal
1977 Buick Regal
1980 Chevrolet Caprice
1981 Chevrolet Caprice
1982 Chevrolet Caprice
1983 Chevrolet Caprice
1984 Chevrolet Caprice
1985 Chevrolet Caprice
1986 Chevrolet Caprice
1987 Chevrolet Caprice
1988 Chevrolet Caprice
1973 Chevrolet Chevelle
1980 Chevrolet Impala
1981 Chevrolet Impala
1982 Chevrolet Impala
1983 Chevrolet Impala
1984 Chevrolet Impala
1985 Chevrolet Impala
1973 Chevrolet Monte Carlo
1974 Chevrolet Monte Carlo
1975 Chevrolet Monte Carlo
1976 Chevrolet Monte Carlo
1977 Chevrolet Monte Carlo
1980 Oldsmobile 98
1981 Oldsmobile 98
1982 Oldsmobile 98
1983 Oldsmobile 98
1984 Oldsmobile 98
1980 Oldsmobile Custom Cruiser
1981 Oldsmobile Custom Cruiser
1982 Oldsmobile Custom Cruiser
1983 Oldsmobile Custom Cruiser
1984 Oldsmobile Custom Cruiser
1985 Oldsmobile Custom Cruiser
1973 Oldsmobile Cutlass
1974 Oldsmobile Cutlass
1975 Oldsmobile Cutlass
1976 Oldsmobile Cutlass
1977 Oldsmobile Cutlass
1980 Pontiac Bonneville
1981 Pontiac Bonneville
1980 Pontiac Catalina
1981 Pontiac Catalina
1973 Pontiac Grand Prix
1974 Pontiac Grand Prix
1975 Pontiac Grand Prix
1976 Pontiac Grand Prix
1977 Pontiac Grand Prix
1973 Pontiac LeMans
1974 Pontiac LeMans
1975 Pontiac LeMans
1976 Pontiac LeMans
1977 Pontiac LeMans
1980 Pontiac Parisienne
1981 Pontiac Parisienne
1982 Pontiac Parisienne
1983 Pontiac Parisienne
1984 Pontiac Parisienne
1985 Pontiac Parisienne
1986 Pontiac Parisienne
Fitment Qualifiers
with 5 Lug Wheels
with 28 Splines
Application Summary
1973 Chevrolet Chevelle
1973-1977 Buick Century
1973-1977 Buick Regal
1973-1977 Chevrolet Monte Carlo
1973-1977 Oldsmobile Cutlass
1973-1977 Pontiac Grand Prix
1973-1977 Pontiac LeMans
1980-1981 Pontiac Bonneville
1980-1981 Pontiac Catalina
1980-1984 Oldsmobile 98
1980-1985 Buick LeSabre
1980-1985 Chevrolet Impala
1980-1985 Oldsmobile Custom Cruiser
1980-1986 Pontiac Parisienne
1980-1988 Chevrolet Caprice
1984-1985 Buick Electra
Specifications
Category
Driveline and Axles
Axle Shaft
Part Type
Brand
US Powertrain
Position
ABS Tone Ring Included
No
Axle Nut Included
No
Axle Shaft Seal Included
No
Bearing(s) Included
No
Brake Hardware Included
No
CV Joints Included
No
Grade Type
Regular
Inboard Spline Quantity
28
Inner Shaft Length
30 7/16"
Prop 65 - Long Label
This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label
WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N
Yes
Rust Resistant Coating
YES
Shaft Material
Steel
Wheel Bolt Pattern Size
5 Lug
Wheel Nuts Included
No