Rear Right Drive Axle Shaft Kit — 29-1/4 In., Rust-Resistant, w/ Nut, Seal, Bearing & Retainer | 1976–1983 Jeep CJ5, CJ7 Full Time Transfer Case
SKU
447-1161R
Price
$170.00
Core Charge
$0.00
Description
Features and Benefits
New-manufacture rear right drive axle shaft — not remanufactured or reconditioned — delivers factory-fresh drivetrain performance for 1976-1983 Jeep CJ5 and CJ7.
Precisely sized at 29-1/4 in. inner shaft length for accurate fitment in Full Time Transfer Case applications — no modification or shimming required.
Rust-resistant coating protects the shaft from corrosion in all operating environments, extending service life on and off the trail.
Complete kit includes axle nut, axle shaft seal, bearing, and retainer — essential installation hardware bundled in one box to streamline the repair.
US Powertrain engineers identify and correct known OEM design flaws, delivering a shaft that meets or exceeds original equipment specifications in critical areas.
Manufactured in the United States and backed by a 90-day warranty for confidence in every mile after installation.
When a rear axle shaft fails on a classic Jeep CJ, getting the right replacement means more than just finding a part that fits — it means finding one you can trust to handle the demands of full-time four-wheel-drive use. The US Powertrain New Rear Right Drive Axle Shaft for 1976–1983 Jeep CJ5 and CJ7 is engineered as a direct-fit replacement for vehicles equipped with the Full Time Transfer Case, delivering the precise 29-1/4 in. inner shaft length required for proper engagement and function. This is a new-manufacture shaft — not remanufactured, not reconditioned — built to restore factory-spec performance and drivetrain integrity to one of America's most iconic off-road platforms. US Powertrain takes a proactive approach to product engineering: where original OEM components had known design limitations, US Powertrain engineers identify those weaknesses and incorporate improvements in the replacement design. The result is a shaft that meets — and in key areas exceeds — original equipment expectations. This kit ships with the components you need to complete the installation correctly: an axle nut, axle shaft seal, and bearing are all included, along with a retainer, so you are not piecing together a bill of materials before the job starts. A rust-resistant coating protects the shaft from corrosion over time, keeping this critical drivetrain component performing reliably whether the Jeep lives on the street, the trail, or both. Backed by a 90-day warranty and manufactured in the United States, this axle shaft is the right solution for restoring confidence to the rear drivetrain of your classic CJ.
US Powertrain New Rear Right Drive Axle Shaft 1976-1983 Jeep CJ5 CJ7 Full Time Transfer Case - 29-1/4 In. w/ Axle Nut, Seal & Bearing
New-manufacture rear right drive axle shaft — not remanufactured or reconditioned — delivers factory-fresh drivetrain performance for 1976-1983 Jeep CJ5 and CJ7.
Precisely sized at 29-1/4 in. inner shaft length for accurate fitment in Full Time Transfer Case applications — no modification or shimming required.
Rust-resistant coating protects the shaft from corrosion in all operating environments, extending service life on and off the trail.
Complete kit includes axle nut, axle shaft seal, bearing, and retainer — essential installation hardware bundled in one box to
streamline the repair.
US Powertrain engineers identify and correct known OEM design flaws, delivering a shaft that meets or exceeds original equipment specifications in critical areas.
Manufactured in the United States and backed by a 90-day warranty for confidence in every mile after installation.
WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614495
ABS Tone Ring Included: No
Axle Nut Included: Yes
Axle Shaft Seal Included: Yes
Bearing(s) Included: Yes
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inner Shaft Length: 29 1/4"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Retainer Included: Yes
Rust Resistant Coating: YES
Wheel Nuts Included: NO
Wheel Studs Included: No
Full Time Transfer Case
Warranty Time: 90 DA
Interchange:
Applications:
US Powertrain New Rear Right Drive Axle Shaft 1976-1983 Jeep CJ5 CJ7 Full Time Transfer Case - 29-1/4 In. w/ Axle Nut, Seal & Bearing
New-manufacture rear right drive axle shaft — not remanufactured or reconditioned — delivers factory-fresh drivetrain performance for 1976-1983 Jeep CJ5 and CJ7.
Precisely sized at 29-1/4 in. inner shaft length for accurate fitment in Full Time Transfer Case applications — no modification or shimming required.
Rust-resistant coating protects the shaft from corrosion in all operating environments, extending service life on and off the trail.
Complete kit includes axle nut, axle shaft seal, bearing, and retainer — essential installation hardware bundled in one box to
streamline the repair.
US Powertrain engineers identify and correct known OEM design flaws, delivering a shaft that meets or exceeds original equipment specifications in critical areas.
Manufactured in the United States and backed by a 90-day warranty for confidence in every mile after installation.
WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614495
ABS Tone Ring Included: No
Axle Nut Included: Yes
Axle Shaft Seal Included: Yes
Bearing(s) Included: Yes
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inner Shaft Length: 29 1/4"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Retainer Included: Yes
Rust Resistant Coating: YES
Wheel Nuts Included: NO
Wheel Studs Included: No
Full Time Transfer Case
Warranty Time: 90 DA
Interchange:
- Crown Automotive Jeep Replacement: 8127071K
Applications:
- 1976-1983 Jeep CJ5 - PartType: Drive Axle Shaft - Position: Rear Right
- 1976-1983 Jeep CJ7 - PartType: Drive Axle Shaft - Position: Rear Right
Installation
Installation Instructions
INS_FORM.docx
(171.9 KB)
Core Charge
Core Charge
$0.00
Dimensions
Dimensions
36 × 11 × 4 in
Weight
38 lb
Fitment
Vehicle Fitment
1976 Jeep CJ5
1977 Jeep CJ5
1978 Jeep CJ5
1979 Jeep CJ5
1980 Jeep CJ5
1981 Jeep CJ5
1982 Jeep CJ5
1983 Jeep CJ5
1976 Jeep CJ7
1977 Jeep CJ7
1978 Jeep CJ7
1979 Jeep CJ7
1980 Jeep CJ7
1981 Jeep CJ7
1982 Jeep CJ7
1983 Jeep CJ7
Application Summary
1976-1983 Jeep CJ5 - Rear Right - Full Time Transfer Case
1976-1983 Jeep CJ7 - Rear Right - Full Time Transfer Case
Specifications
Category
Driveline and Axles
Axle Shaft
Part Type
Brand
US Powertrain
Position
ABS Tone Ring Included
No
Axle Nut Included
Yes
Axle Shaft Seal Included
Yes
Bearing(s) Included
Yes
Brake Hardware Included
No
CV Joints Included
No
Grade Type
Regular
Inner Shaft Length
29 1/4"
Prop 65 - Long Label
This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label
WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N
Yes
Retainer Included
Yes
Rust Resistant Coating
YES
Wheel Nuts Included
No
Wheel Studs Included
No