Rear Steel Drive Axle Shaft — 32-Spline, 32-1/4 in., ABS Tone Ring, Bearings & Wheel Studs Included | 2018–2025 Jeep Wrangler
SKU
447-10640
Price
$395.00
Core Charge
$0.00
Description
Features and Benefits
New-manufacture steel construction — not remanufactured — ensures consistent quality without dependence on core condition, providing a reliable baseline for every installation.
32 inboard splines and 32-1/4 in. inner shaft length matched to factory Jeep Wrangler specifications for a true direct-fit, bolt-in replacement with no modification required.
Complete kit includes ABS tone ring, wheel bearings, and wheel studs — everything needed to finish the job in one box, reducing parts-sourcing time and minimizing vehicle downtime.
Rust-resistant coating shields the shaft from corrosion caused by water, mud, and road debris — critical protection for a vehicle built for off-road and all-weather use.
5-stud wheel bolt pattern with all five wheel studs included matches Jeep Wrangler OE configuration, eliminating any wheel fitment concerns after installation.
Backed by a 1-year limited parts warranty, providing documented assurance of product integrity and added confidence for both installer and vehicle owner.
When a rear axle shaft fails on a Jeep Wrangler, you need more than a basic replacement — you need a shaft engineered to handle the demands of the platform. The US Powertrain Rear Drive Axle Shaft (PN 447-10640) is a new-manufacture steel shaft built specifically for 2018–2025 Jeep Wrangler applications, delivering a direct-fit solution that restores factory driveability and stands up to daily driving as well as the occasional trail run. Unlike remanufactured alternatives that depend on the condition of a used core, this is an all-new component built to precise dimensional specifications from the ground up. The shaft features 32 inboard splines and a 32-1/4 inch inner shaft length matched to Wrangler factory dimensions for a true bolt-in installation. A rust-resistant coating protects the shaft from corrosion in the wet and muddy conditions Wranglers routinely encounter. The complete assembly arrives ready to install: the ABS tone ring, wheel bearings, and wheel studs are all included, eliminating the need to source additional components before the job can begin. US Powertrain engineers products with an eye on OE design — evaluating original equipment for known weaknesses and building improvements into their new parts where warranted. The 1-year limited parts warranty provides added confidence in the long-term reliability of this repair. Whether you are returning a Wrangler to the road after an axle failure or getting ahead of wear before it becomes a problem, the US Powertrain 447-10640 delivers the quality and completeness that professional technicians and serious Jeep owners demand.
New steel rear drive axle shaft for 2018–2025 Jeep Wrangler. Features 32 inboard splines, 32-1/4 in. inner shaft length, rust-resistant coating, and includes ABS tone ring, bearings, and wheel studs. Sold individually.
US Powertrain New Rear Drive Axle Shaft w/ ABS Tone Ring, Bearings & Wheel Studs for 2018–2025 Jeep Wrangler | 32 Spline | Steel
New-manufacture steel construction — not remanufactured — ensures consistent quality without dependence on core condition, providing a reliable baseline for every installation.
32 inboard splines and 32-1/4 in. inner shaft length matched to factory Jeep Wrangler specifications for a true direct-fit, bolt-in replacement with no modification required.
Complete kit includes ABS tone ring, wheel bearings, and wheel studs — everything needed to finish the job in one box, reducing parts-sourcing time and minimizing vehicle downtime.
Rust-resistant coating shields the shaft from corrosion caused by water, mud, and road debris — critical protection for a vehicle built for off-road and all-weather use.
5-stud wheel bolt pattern with all five wheel studs included matches Jeep Wrangler OE configuration, eliminating any wheel fitment concerns after installation.
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614303
ABS Tone Ring Included: YES
Bearing(s) Included: YES
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inboard Spline Quantity: 32
Inner Shaft Length: 32 1/4"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Rust Resistant Coating: YES
Shaft Material: Steel
Wheel Bolt Pattern Size: 5
Wheel Nuts Included: NO
Wheel Stud Quantity: 5
Wheel Studs Included: Yes
Warranty Time: 90 DA
Applications:
New steel rear drive axle shaft for 2018–2025 Jeep Wrangler. Features 32 inboard splines, 32-1/4 in. inner shaft length, rust-resistant coating, and includes ABS tone ring, bearings, and wheel studs. Sold individually.
US Powertrain New Rear Drive Axle Shaft w/ ABS Tone Ring, Bearings & Wheel Studs for 2018–2025 Jeep Wrangler | 32 Spline | Steel
New-manufacture steel construction — not remanufactured — ensures consistent quality without dependence on core condition, providing a reliable baseline for every installation.
32 inboard splines and 32-1/4 in. inner shaft length matched to factory Jeep Wrangler specifications for a true direct-fit, bolt-in replacement with no modification required.
Complete kit includes ABS tone ring, wheel bearings, and wheel studs — everything needed to finish the job in one box, reducing parts-sourcing time and minimizing vehicle downtime.
Rust-resistant coating shields the shaft from corrosion caused by water, mud, and road debris — critical protection for a vehicle built for off-road and all-weather use.
5-stud wheel bolt pattern with all five wheel studs included matches Jeep Wrangler OE configuration, eliminating any wheel fitment concerns after installation.
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Brand: US Powertrain
UPC: 00810190614303
ABS Tone Ring Included: YES
Bearing(s) Included: YES
Brake Hardware Included: No
CV Joints Included: No
Grade Type: Regular
Inboard Spline Quantity: 32
Inner Shaft Length: 32 1/4"
Prop 65 - Long Label: This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label: WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N: Y
Rust Resistant Coating: YES
Shaft Material: Steel
Wheel Bolt Pattern Size: 5
Wheel Nuts Included: NO
Wheel Stud Quantity: 5
Wheel Studs Included: Yes
Warranty Time: 90 DA
Applications:
- 2018-2025 Jeep Wrangler - PartType: Drive Axle Shaft - Position: Rear
Installation
Installation Instructions
INS_FORM.docx
(171.9 KB)
Core Charge
Core Charge
$0.00
Dimensions
Dimensions
42 × 8 × 8 in
Weight
30 lb
Fitment
Vehicle Fitment
2020 Jeep Wrangler
2019 Jeep Wrangler
2021 Jeep Wrangler
2022 Jeep Wrangler
2018 Jeep Wrangler
2023 Jeep Wrangler
2024 Jeep Wrangler
2025 Jeep Wrangler
Fitment Qualifiers
with 5 Bolt Pattern
with 32 Splines
Application Summary
2018–2025 Jeep Wrangler — Rear Drive Axle Shaft (Qty: 1)
Specifications
Category
Driveline and Axles
Axle Shaft
Part Type
Brand
US Powertrain
Position
ABS Tone Ring Included
Yes
Bearing(s) Included
Yes
Brake Hardware Included
No
CV Joints Included
No
Grade Type
Regular
Inboard Spline Quantity
32
Inner Shaft Length
32 1/4"
Prop 65 - Long Label
This product may contain a chemical known to the state of California to cause cancer or birth defects. www.p65warnings.ca.gov
Prop 65 - Short Label
WARNING: Cancer – www.p65warnings.ca.gov
Prop 65 Y/N
Yes
Rust Resistant Coating
YES
Shaft Material
Steel
Wheel Bolt Pattern Size
5
Wheel Nuts Included
No
Wheel Studs Included
Yes
Wheel Stud Quantity
5